The 10NMB520 is a 10" mid-bass transducer created for compact reflex 2-way enclosures. It can be coupled with 1" compression drivers and it can also be used in mid-low sections on modern line-array systems.<br />
Its features and design characteristics make it extremely defined in mid-range frequencies, offering a significant and consistent bottom-end. This also makes it suitable for monitoring applications.<br />
The extremely powerful external neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange. The overall result is the best power to weight ratio available on the market today.<br />
The curvilinear cone, specified with a high damping wood pulp has been designed to achieve the best possible linearity within its frequency range. The in-house developed cone treatment is a humidity repellent and significantly dampens bell-mode resonances.<br />
The 65mm edge-wound voice coil assembly is wound on a strong fiberglas former in order to improve force transmission and power handling.<br />
A proprietary humidity-block cone treatment makes the transducer suitable for outdoor use in adverse weather conditions. In addition, a special coating applied to both the top and back plates makes the 10NMB520B far more resistant to the corrosive effects of salts and oxidization.
Mounting and Shipping Info
Nominal Diameter260 mm ( in)
Nominal Impedance16 Ω
Nominal Power Handling1300 W
Continuous Power Handling2600 W
Frequency Range60 - 5000 Hz
Voice Coil Diameter0 mm ( in)
Surround ShapeDouble roll
Woofer Cone TreatmentWeather protected
Recommended Enclosure24.0 dm3 (0.85 ft3)
Recommended Tuning70 Hz
Resonance Frequency64 Hz
Vas43.0 dm3 (1.52 ft3)
Sd340.0 cm2 (52.7 in2)
Overall Diameter260 mm (10.24 in)
Bolt Circle Diameter275 mm (10.83 in)
Baffle Cutout Diameter232.0 mm (9.13 in)
Depth104 mm (4.09 in)
Flange and Gasket Thickness14 mm (0.55 in)
Net Weight3.0 kg (6.61 lb)
Shipping Weight3.57 kg (7.87 lb)
Shipping Box275 x 275 x 164 mm (10.83x10.83x6.46 in)
2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.